After several months of uncertainty, the Feed-in tariff (FiT) scheme has now started to provide the solar industry with some sense of stability.
This certainty is likely to bring back confidence and increase the popularity of solar as a viable renewable technology. Fitting solar PV and solar thermal panels requires that contractors to pay close attention to safe working practices during installation.
Ian Page, General Manager at Easi-Dec, a Kee Safety company, takes a close look at the risks and the options.
Still in its relative infancy, the solar industry is one of the fastest growing sectors in the UK, with solar panels accounting for the majority of all total renewable energy installations. This growth will no doubt be strengthened, thanks to recent Government announcements on changes to the FITs scheme. With effect from the 1st August, better value for money will be provided and homeowners will be able to plan their solar installations with renewed confidence.
For contractors tasked with installing solar panels, one of the fundamental safety issues relates to working at height. After all, in 2011, the HSE (Health & Safety Executive) revealed that falls from heights accounted for 16% of all deaths in the workplace.
The key piece of legislation here is the Working at Height (2005) regulations which was introduced to ensure the physical safety and legal protection of employees, employers as well as other building professionals contracting other on their behalf. It is essential that all work at height is properly planned and carried out by competent members of staff to ensure that minimal accidents occur. It is also the contractors responsibility to be trained to safely work at height, ensuring that they understand and work within the regulations, with adequate measures taken to ensure the welfare of users.
Since the solar installation market is relatively young, investment in training so that contractors fully understand safe working at height practice is critical to build expertise and underpin their experience. Solar panels have a set of unique and challenging characteristics. The dimensions and weight of the panels to be lifted and fitted into place make them awkward to handle, particularly in confined spaces. If mishandled, they can be easily scratched and damaged which will affect performance, and yet replacement will be a significant additional cost. The roof itself is a fragile environment which can also be damaged if proper care is not taken with the panels.
The right choice of access equipment is significant in helping to minimise these risks and create a safe and versatile environment for working at height.
Traditional scaffolding, combined with platforms, toe-boards and ladders may be the first option to consider. So long as the structure is assembled in line with best practice guidelines for standard tube and fitting scaffolds (BS5973), amended to adopt the tie patterns and facade bracing as detailed in TG20:05a then it can provide a safe solution. However, if needed for a number of properties on a scheme, scaffolding is time-consuming to assemble, take down and re-assemble elsewhere, it is aesthetically unattractive and can be expensive.
A much better solution is provided by dedicated access systems on the market which have been developed specifically with the solar industry in mind. This type of system typically incorporates an access platform with an integral lifting mechanism for solar panel installations. It can be combined with standard platform and walkway components to create an 8m long safe working platform complete with edge protection, allowing installation of solar arrays up to 8m wide.
After assembly and erection of the platform, the solar panel can be attached to the lifting frame with the straps provided and hoisted up to platform level by pulling on a rope. The self locking pulley with this kind of system is capable of lifting up to 75kg. A hinged floor section can then be closed after the solar panel passes through it to maintain platform integrity.
Not only is this a thought-through solution for the solar installer, but this type of access platform option also complies fully with the relevant legislation. This includes EN12811 – Temporary Work Equipment, EN13374 Class C – Temporary Edge Protection and the Working at Height regulations.
Manufactured from lightweight aluminium, this type of platform is also quick and easy to set up, take down, move to another location, and then re-assemble, so making it perfect for large scale retrofit schemes.
Once on the roof, it is essential that contractors can work safely and securely access to install the solar panels. Standard roof ladders leave little room between the physical ladder and the roof to allow for easy panel installation. Again, the best advice is to work with equipment tailored to the particular needs of the solar installer. For example, a Solar ladder, such as that available from Easi-Dec will maximise safety, minimise the risk of panel or roof damage and make installation much quicker and easier.
Unlike normal roof ladders, this specialist piece of equipment provides a 23cm clearance from the roof to the underside of the stile and up to 4.6m free span over the roof. The ladder is simply rolled up on its soft rubber wheels and then flipped 90o into position over the ridge. A roof hook can be fixed to any rung, enabling the ladder to fit any roof with the excess length flying the ridge. Another advantage is that this type of ladder can be traversed along the ridge in either direction without having to be taken down, making it much easier to reposition, and the work programme much faster, than an ordinary roof ladder.
With solar panel installation increasing, contractors are obliged to conduct the work in a safe procedure, effectively managing and minimising the risks involved. But with the specialist equipment now available for access and roof-mounted solar installation, they can also help provide a smart working environment. This is one which fully complies with safety regulations, and allows contractors to work faster and more cost-effectively than using standard scaffolding and ladders.
For more information visit, www.easi-dec.co.uk