Comprehensive Schöck range meets Embassy Gardens demands


Schock

Stretching along the south bank of the Thames from Battersea to Vauxhall, the Nine Elms area in London, for so long a neglected stretch of industrial land, has become the largest development zone in Central London.   Over the next ten it will see 20,000 homes built, along with new schools, parks, cultural centres, a pedestrian and cycle bridge over the Thames; and the opening of two new London Transport underground stations.

The residential and commercial heart of this huge development is Embassy Gardens, London’s new diplomatic precinct on the riverside.  It forms the backdrop to the new US Embassy, scheduled to relocate from Grosvenor Square during 2017.  The blocks are arranged around raised courtyards, with retail and commercial frontages at ground level that connect the Embassy Square, Linear Park and River Frontage through a network of streets and a central square.

There are differing building heights to minimise overshadowing and overlook and the buildings incorporate a wide array of public and amenity spaces including communal courtyards, roof gardens, private terraces and balconies.

 Schock

The first release of apartments in Embassy Gardens is the Ambassador Building, which comprises six distinct cores, which house not only the residential apartments, but also a fully equipped private members club to rival the best in any international hotel.

The development has inevitably attracted a sophisticated level of residents who demand the highest standards of detail throughout these buildings; and one of the key features is the wide variety of balcony types, each governed by unit size and orientation.

OISD confirms need to minimise thermal bridging

With such a demanding specification involving different balcony types, the minimisation of any possible thermal bridging problems is crucial. This is something highlighted in research findings from the Oxford Institute for Sustainable Development (OISD) at Oxford Brookes University.

It shows that with increasingly improved airtightness and fabric U-values in UK buildings, thermal bridge heat losses are responsible for an increasing percentage of the overall building heat loss.   It is common for thermal bridges to account for 20% – 30% of the heat loss in multi-residential units (as calculated by thermal modelling) and balcony connections can be a major contributor to the thermal bridge heat loss – if effective thermal isolation is not included in the design.    And the company able to offer the ideal range of solutions to the differing thermal connectivity demands posed by the complex balcony designs at the Ambassador Building is Schöck.

Isokorb type KS for concrete-to-steel

Verifiable performance standards and full compliance

The diverse range of Schöck Isokorb load-bearing thermal insulation products guarantees totally verifiable performance standards, meets full compliance with the relevant UK building regulations and offers BBA Certification and LABC Registration.   The specific requirements at the Ambassador Building involved firstly the Schöck Isokorb type K for concrete-to–concrete connectivity.

The type K units were incorporated into the cast in-situ cantilever balconies on the road facing external elevation; and where there was a shear force transfer element required, also involving concrete-to-concrete loggia’s or supported balconies, the Isokorb type Q was installed.  A further variation, Isokorb type K-WU units were also used as slab-to-wall thermal breaks.

Isokorb type KS for concrete-to-steel

The Isokorb type KS for concrete-to-steel were used on the internal courtyard balconies; and to assist the structural engineer in keeping the transverse beam continuous between the external columns, Schöck SLD dowels were also used to support the propped cantilever walkway externally.

In addition to providing highly effective connectivity solutions for concrete-to-concrete and concrete-to-steel thermal bridging situations, the Schöck Isokorb range also offers a modular product for steel-to-steel applications and even a maintenance free alternative to wrapped parapets.

When any Isokorb product type is incorporated into residential buildings, the required fRsi value – the temperature factor used to indicate condensation risk that must be equal to or greater than 0.75 – is always comfortably met.

For a free copy of the Schöck Thermal Bridging Guide and / or the Thermal Bridging Solutions brochure – contact the company on 01865 290 890 or visit www.schoeck.co.uk

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s